The Correct Posture of the Pit Mechanical Rod

Whether for sprout new or old driver. Machinery has a mysterious attraction, Simple and crude appearance and high, A root thick with start feeling great and domineering, In the palm of your hand carefully friction and a sense of achievement ~ strangely

It is no wonder that COV office is the most often hear the dialogue:”What do you think I this pole with the good-looking?”, “I’m a suction nozzle you see new followed the rod with?”” What do you think I this rod mill for a long time color is not good?”…

So a group of big masters EP son why so obsessed with good-looking? So, my friend, do you want to mechanical waste into the pit? Do you want to take root returns to thrive? Do you want to correct posture to get the soul in the dream of a magic stick?

What is a mechanical lever? 

Mechanical lever interpretation entries:

1. E-cigarette power supply equipment adopting mechanized structure.

2. It is usually cylindrical, so it is called a pole.

Resolution:Mechanical lever, is a popular with atomizer interface wires, battery, as well as the mechanical switch. All depends on the battery power supply capacity of the current electricity as a whole. Voltage output.

What are the types of mechanical rods?

According to the top 510 interfaces can be divided into two kinds:

1.510 interface directly connected battery positive electrode type. Such a mechanical lever at the top of the interface is not fitting in 510, after screwing in the atomizer, the positive contact at the bottom of the atomizer will direct contact with the battery positive electrode. The advantages of such a structure is to reduce the length of the circuit, reduce the loss of electricity, the output current of the mechanical lever is smoother (that is, the so-called violence), and can greatly reduce the lever. The body length.

2. Top non-direct contact battery positive type. This kind of mechanical lever at the top of the 510 internal usually comes with conductive interface connector, the atomizer after screwing in 510 interfaces, first connect conductive connector, battery positive electrode through fitting connection. The advantages of this kind of structure is safety, compatibility of atomizer is stronger, able to adapt to flexible electrode at the bottom of the atomizer, reduce directly from the 510 outlet short circuit.

According to the material to:

Initially the shaft is usually red copper or brass, but in the past two years have produced a lot of use other material mechanical lever, for example: space aluminum, stainless steel, titanium alloy, silver, etc. While the use of different material is directly related to the use of mechanical lever effect, because of various kinds of metal material of conductive performance (i.e., different resistance), and different resistance in electrical current. Old-fashioned produces loss. That is to say, sorting Roma material used for shaft mechanical lever effect will be better, (the lower the resistance, the higher the passing rate of the current), will try to play to the heating wire, electrical energy and minimize waste on the rod of electricity.

According to the appearance to points:

Mechanical lever modelling changeable, from can be roughly divided into 22 mm in diameter, 24 mm, 29 mm, 32 mm, one of the most common is 22 mm in diameter and 24 mm diameter. Should choose when buying a mechanical rod with the diameter of the atomizer matching, or it might happen – “oh, you see, the man took a microphone ah ~”. And the overall appearance is very variable, such as shell, shell of hollow out distorted, spray paint, bring their own small pretty waist, pipe set of replaceable, resin, stability of woodwind failure, yapping too much as the mouth of the red number ~ ~ ~ than female students.

How to choose a mechanical lever?

Of new when selecting a mechanical lever should follow “needle” “eye” “have a lock on” the “three” principle.” The Needle” is refers to, in the 510 atomizer interface internal mechanical lever, have a responsible for the positive and battery positive electrode column connection atomizer.” Eye” means, in the mechanical lever or at the bottom of the rod body with one or more explosion-proof, pressure, cooling hole.” Have a lock” means, on the mechanical lever switch with the touch switch lock by mistake.

How to play the mechanical lever safely?

The Mechanical lever must be lithium-ion battery, the high ratio power battery! Don’t use broken battery! Broken battery exposed metal will cause the positive and negative short circuit occurred danger! The battery voltage can only according to the annotation in the battery voltage to calculate! Don’t use low discharge battery, if the discharge current demand also prone to dangerous! Choose battery should choose low internal resistance, the most useful tools under test! With the battery, the relief valve to buy when ask businessman! Battery is put within 500 times on the device with protection use, safety! Power battery don’t flow, discharge, overshoot, wet! You must be aware of this a few points!

Well, about the mechanical lever we said to here, Anyway, write too long also didn’t see you welcome to think the pole into the pit of the new also added all kinds of knowledge to welcome in the comment area.

The Difference Between Mechanical Box, Semi-mechanical Box and Regulating Box

But when you get hot discussion,just into the pit of trembling, of new are inMechanical box is what? What is half mechanical box? With the difference?

Pinch refers to a calculate, and it’s time to science. Today the clown will break down for you Mechanical box, half the difference between mechanical box, regulating box. Remember don’t understand of the new collection ~ (friendly smile face).

First of all, on the whole, mechanical box, half machine box, regulating box are three types of products. They are the most fundamental difference is that a chip, which is without chip, chip, chip control difference. Specific we can respectively:

Regulating box

Regulating box can be said to be the most common equipment, although now regulating box shapes. But most of all by three key layout:+ key, keys, the ignition key Three times, five times switch machine, lock screen or enter a menu; By +, a key to adjust the output wattage. Although we call regulating boxBut in fact,We adjust the output wattage (W),Ultimately change the output power (V).

Regulating box is the biggest advantage of chip protection. And the output of the fine adjustment. Through the control chip, can be violent output, also can avoid caused by short circuit etc cause a safety hazard to use rest assured that worry. Is the choice of most of the players.

Semi-mechanical Box

Violence is semi-machinery safety box of the best interpretation. It through a pressure regulating knob will be “safe” and “violence” two seemingly no wordCombined together. The buttons on the box usually only two:Pressure regulating knob, ignition key.

Although not for fine adjustment, the adjustment process is very simple, rotating pressure regulating knob. Don’t have to calculate how much should be transferred to the tile. This way, semi- mechanical box is not suitable for matchOil storage and cloud to use with suitable with optimum di cloud are compared, simple and violence.

Will tell from the security, causes all sorts of simple protection, protection chipBut as a result of not full chip control. So output semi-mechanical box can also enjoy the violence.

Mechanical box

Next we machinery box.As the name suggests, it is a kind of machinery..The most fundamental role is fixed and connected atomizer electrode and the battery. But since there is no any restriction and protection. The battery with the most high power discharge directly. There is no limit to the output of the natural and very violence. But without the protection of the chip has certain security hidden danger. So the mechanical box is more suitable for a certain knowledge, technology and ability of old players.

For more please visit:https://cosmiccacaompls.com